HP Photosmart C8100 All-in-One won't print (Printer says "out of paper" but need to pull back the blue photo tray).

Mine's a C8180. Everything looks fine. You print a test page and the rollers spin for ten seconds or so and then a non-helpful message appears on the printer saying you're out of paper. Except you're not.

You RTFM. No help.

You go online to HP's troubleshooting guide for this exact problem and they have a detailed list of things to try except none of them fix the problem.

I figured this one out myself but if you look here somebody else did too

yoofah says:
30/08/2010 at 04:43

Another possible issue not identified in the video:
these printers are equipped with a blue “photo tray” in the main paper tray area. If this is pushed in, it’ll try to draw from that instead of the main train tray, causing this same type of error. The solution is to reach your head in, and pull out that blue tray until it is flush with the main tray.


Yeah, you need to pull that little blue photo tray back a few inches and - voila - the printer prints again. (I don't think yoofah meant to reach your head in - I think he/she meant reach your hand in - but then again, I had to do a little bit of both to figure it out myself.)

The problem here is that this 10 second fix for a problem that renders the printer non-operable is never mentioned in the manual (so RTFM does no good), not mentioned in the error message, and not mentioned in HP's online troubleshooting guide.

I post this here - hopefully someone may find it useful.



Comments

Anonymous said…
The blue photo paper tray in my C8180 has stopped engaging, meaning that after hitting the print command, blue tray does not move forward and thus the system does not "grab" the paper for print. I can however push the tray be hand into the print position and the system does print. On the flip side the blue tray does not disengage and I have to do so by hand. comments please.
June 29, 2011 at 10:01 AM
John Glotzer said…
I haven't looked at this recently. But I think this is the gist of my original blog post. You say that unless you push the blue tray in, the machine won't grab paper from the photo tray but if you push it in it will.

My original post was that if the blue tray was pushed in (in my case inadvertently probably because I had left it that way) it won't take paper from the regular tray. But when I pulled the tray out, it would (i.e. take paper from the regular tray).

This is, more or less, precisely my point. I'm not sure that this is a "bug" or a "feature" but it seems to be the way things work - so forewarned is forearmed.
July 1, 2011 at 7:22 AM
Leigh said…
my printer says photo tray problem says to push photo tray all the way in but still not working. i keep getting the same error message i am not trying to print photos just regular documents.
September 8, 2014 at 5:55 AM
Anonymous said…
Hi
Many thanks for your comments on this problem.
My printer said out of paper, paper jam, blue tray error.
I took the printer apart and put it together again, but not
util I read this comment about the photo tray the problem was solved.
I also placed a photosheet in the photo tray and that seemed to help also.
May 24, 2020 at 8:18 AM
Post a Comment

Popular posts from this blog

Hit failing alternator with a hammer to confirm diagnosis of failing alternator due to bad brushes

Hitting something with a hammer often feels good but does nothing useful. Here's one case where it actually helps. On my 2004 Ford Explorer the alternator light came on. I brought it to the auto parts store and they put a volt meter on it. The alternator needs to put out a voltage that is higher than the battery's full charged voltage in order to properly function - somewhere in the 14 volt range. Mine came in low - probably below 13.5 volts. So the guy at the auto parts store took a rubber mallet to the alternator and just briefly, for a period of 10 seconds or maybe less the voltage jumped up into the normal range before falling back to where it was before. This confirmed the diagnosis of a bad alternator in general and worn brushes in particular. The brushes are spring loaded, are located in the are a wearable item and must make contact with the fixed part of the alternator. Tapping the alternator with the hammer temporarily changes spatial relationships between the brushes ...
Read more

alternatives --install gets stuck: failed to read link: No such file or directory

Alternatives utility gets stuck doing install. Fedora 17 x86_64. Removing the /var/lib/alternatives/javaws file resolved the issue (for me). # alternatives --install /usr/bin/javaws javaws /usr/java/jdk1.7.0_07/jre/bin/javaws  20000 failed to read link /usr/bin/javaws: No such file or directory # ls /usr/bin/javaws ls: cannot access /usr/bin/javaws: No such file or directory # ls -al /var/lib/alternatives/javaws -rw-r--r--. 1 root root 105 Sep 22 11:39 /var/lib/alternatives/javaws # rm /var/lib/alternatives/javaws rm /var/lib/alternatives/javaws rm: remove regular file `/var/lib/alternatives/javaws'? y # alternatives --install /usr/bin/javaws javaws /usr/java/jdk1.7.0_07/jre/bin/javaws  20000 # which javaws /bin/javaws # ls /usr/bin/javaws /usr/bin/javaws # ls -al /var/lib/alternatives/javaws -rw-r--r--. 1 root root 65 Sep 22 11:50 /var/lib/alternatives/javaws # cat /var/lib/alternatives/javaws auto /usr/bin/javaws /usr/java/jdk1.7.0_0...
Read more

Using SSH, SOCKS, tsocks, and proxy settings to create a simultaneous "dual use" work/home computer

The Problem: Allow one linux workstation to be simultaneously used for both work and non-work purposes so that work and non-work traffic are segregated. The Requirements: I would like to be able to use the following applications in the corporate environment VNC Web (typically Google Chrome but potentially other browsers as well) Email - IMAP, SMTP, LDAP using Thunderbird IM - pidgin As already mentioned here the corporate network has an SSH server that you authenticate and connect to and from there you can reach the other corporate network resources. I would like non-work related traffic to bypass the corporate network - this is mostly web traffic but might also include things like Spotify, yum updates, and other assorted tasks. Finally it would be nice (but not essential) to wrap all this up in a handy GUI operation or series of operations. The Environment:  Fedora Core 16 (x86_64) and Gnome 3. The Solution:  Use SSH, SOCK...
Read more